Operation, Calibration & Service Manual
LinkBelt - DS350 1334 Console
Key Switch
The ant i-two-block sw itch k ick-out f unction is deact ivated w hen the KEY
SWITCH (13) is turned to position "B"
and t he “By-pass A2B” button (14) is
pushed.
Or
The LM I k ick-out f unction is deact ivated w hen t he KEY SW ITCH ( 13) is
turned to po
sition "B" and the “By-pass LMI” button (15) is pushed.
KEY SWITCH (13) can be operated only by using the matching button.
Button "By-pass A2B"
This button can be operated only if key switch (13) is turned to position B.
While pushing this button, the kick-out function of the anti-two-block switch is
deactivated.
The By-Pass Warning Light (5) flashes to indicate that the kick-out function is
deactivated.
Button "By-pass LMI"
This button can be operated only if key switch (13) is turned to position B.
While pushing this button, the control lever lockout function of the LMI is
deactivated.
The By-Pass Warning Light (5) flashes to indicate that the kick-out function is
deactivated.
Since but ton ( 14) and ( 15) deact ivate t he kick-out f unction of t he LMI system / t he ant i two-block
system, the following instructions must be obeyed:
The by -pass f unction shall be used w ith discr etion, as unw arranted use of it t o ov erride the
control lev er lock out sy stem can r esult in har m t o t he cr ane and dang er t o pr operty and
persons.
Never use t he by -pass f unction t o eit her ov erload or oper ate t he cr ane in a non-permissible
range.