Explanation of Individual Menu Items
4-21
$
JOB SEPARATION
Many application programs terminate a printjob with the PJL command EOJ.
The firmware is supporting this command as well and allows to link the EOJ
recognition to the set up parameter JOB SEPARATION (ON / OFF) in the
GENERAL MENU.
If set to ON and the last page of a job is printed, a cut is performed, printing
is stopped and the paper is removed into the parking position.
Factory default is JOB SEPARATION = OFF. This setting means that neither
automatic feeding into the cut position, and no automatic cutting is
performed. It is appropriate for batch output of continuous forms.
$
TRACTOR CHANGE CUT
The automatic cut function after selecting a new SOURCE (e.g. from LOWER
to UPPER) or a new DESTINATION (e.g. from BOTTOM to TOP) can be set
to OFF. Factory default is ON.
ON -
The automatic cut function is active.
OFF -
After a change of SOURCE or DESTINATION the printer switches
into the OFFLINE mode and the display shows the message
11 REMOVE PAPER. Press
to enter the menu mode and
activate CUT FORM. The paper will be cutted and move backwards
to parkposition.