Appendix A Programming Guide
A-10
PJL COMMAND
(cont.)
Description
@PJL SET
The SET command allows the user to change
[LPARM : personality]
the value of PJL Current variables for the length
Variable = value
of a PJL job, or until a PJL reset condition
returns the value to is default.
Personality : PCL, HEXDUMP
For supported variables and values see table:
A-2.1.4 PJL Variables and Values
@PJL RDYMSG ["text of
Display a message in the 1 line of the printer´s
message
]
operator panel
st
The message length is at max. 16 characters
The printer remains online
@PJL RDYMSG ["
]
Clear the message on the printer´s operator
panel
@PJL OPMSG ["text of
Display the message in the 1 line of the
message
]
printer´s operator panel
st
The message length is at max. 16 characters
The printer gets off line
After prompting of this status by pushing the
offline/online button, the printer goes ONLINE
again
@PJL INQUIRE
Requests the current value for an environment
[ LPARM : personality ]
variable.
Variable
personality = PCL, HEXDUMP
port =
For supported variables and values see table:
@PJL DINQUIRE
Requests the default value for an environment
[ LPARM : personality ]
variable.
Variable
personality = PCL, HEXDUMP
port =
For supported variables and values see table: