rear cover
top cover
front cover
lever to open the
top cover
lever for paper exit
JAM BEFORE FUSER
JAM LOWER INPUT
JAM UPPER INPUT
JAM NEAR CUTTER
JAM NEAR FUSER
JAM NEAR Photoconductor
in cutter area
Troubleshooting and Diagnostics
Display
That means...
Measure
6-3
13 JAM BEFORE FUSER
Paper jam at position ...
Clear the paper path; see
13 JAM UPPER INPUT
... near to the upper
If there is no jam visible or
13 JAM LOWER INPUT
... near to the lower
into the printer dirty
13 JAM NEAR PC-CART.
... near to the PC-
cause for the error
13 JAM NEAR FUSER
... near to the Fuser unit
... and set paper to park
13 JAM NEAR CUTTER
... near to the cutter
Stack the paper properly
... between transfer and
figure below ...
fuser area
paper input
even no paper inserted
paper input
sensors might be the
Cardridge
message. Clean the
position or in the
by manual intervention.
paper exit area
Tear off the paper and
... pendulum of intelli-
reload it properly.
gent paper stacker
If there is no real jam in
iPS 4050/4060
the iPS but the sensor
optical sensors and the
paper path around them
with a soft, dry cloth.
position
was activated, press
to continue.
Note:
For recovery after paper jam see next page!