manualshive.com logo in svg

PSI PP 4050XP, Руководство пользователя, Страница: 108 / 236

Поделиться
Скачать
PSI PP 4050XP Скачать руководство пользователя страница 108

4

1

6

8

9

9

5

7

Maintenance

5-9

Note:

Don´t destroy the small plastic lip above the toner output of the

Developer Unit (1).

$

Insert a new Developer Unit (1) and fix it by pressing down the lever (9).

$

Pull the Toner Cartridge (7) completely off the developer.

Note:

An orange tape (8) is visible which is fixed to a foam block that closes

the toner entrance into the developer.

$

Remove the foam block from the Developer Unit.

$

Activate the Toner Cartridge as described in paragraph 5.1.1 Refilling the

Toner.

Note:

Change into the OFFLINE mode and reset the Developer INFO (see

BASIC SETTINGS 





 CONFIC MENU).

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es

Содержание PP 4050XP













































































































































































































































Отзывы:

Нет отзывов