Explanation of Individual Menu Items
4-13
$
PAPER EXTENDED
With PAPER EXTENDED set to NO printing into the border areas of A4 and
LETTER pages is not possible which is in line with the PCL5 definition.
However, for compatibility to existing applications which use the border
areas PAPER EXTENDED can be set to YES. Now the entire physical page
is printable at which the default cursor position remains unchanged.
With format CUSTOM the complete page can also be printed but the default
cursor position is always the first dot at the upper left corner.
$
PAPER SELECTION
Selecting the paper format (A4, LETTER, CUSTOM) from the host can be
done with PCL or PJL commands. The execution of this commands can be
influenced by the parameter PAPER SELECTION.
RECOGNIZE
-
A change of PAPER is possible via interface by
means of PCL- or PJL-commands.
ONLY PJL
-
Only via PJL-command (default)
IGNORE
-
Any command to change the paper format will be
ignored; the paper format can only be modified via
the operator panel.
Note:
PAPER SELECTION by the printer driver needs the setting
RECOGNIZE or ONLY PJL.
The PSi printer driver for Windows ® uses PCL and PJL
sequences.
$
PAPER PATH SELECT. (Paper Path Selection)
With this parameter it is possible to recognize or ignore the change of the
parameter SOURCE and DESTINATION via the interface. Factory default is
RECOGNIZE.
RECOGNIZE
-
A change of the parameters SOURCE and/or
DESTINATION is possible via interface by means
of PCL- or PJL-commands. (See Appendix A Paper
Source and Exit Selection).
IGNORE
-
Any command to change the parameter will be
ignored.
Note:
PAPER PATH SELECTION by the printer driver needs the setting
RECOGNIZE.