Troubleshooting and Diagnostics
6-2
6.1
Power-related Problems
Display elements do not lit when power is switched On
$
Check that the power cord and plug are securely fitted to the printer and
to the walls outlet.
$
Ask for the power connector connections (and fuse, if fitted) to be
verified.
6.2
Status and Error Messages
After selftest the printer enters the ONLINE mode.
In case of a failure the printer changes into the OFFLINE state and one of the
following messages may appear on the display:
Display
That means...
Measure
00 POWER SAVE
After a period of time
The next print job changes
defined by the parameter
the status
power save without
printing the printer
changes into the state
power save
Power Consump. < 45 W
02 WARMING UP
Warming up before
Wait
printing
11 REMOVE PAPER
Paper in the paper path
Remove paper, if
has to be removed
necessary cut it before (s.
Page 4-1 CUT FORM)
and insert it again
12 COVER OPEN
Front, rear, or top cover is
Close cover
open