Appendix A Programming Guide
Appendix A Programming Guide
A-9
A-10
PJL COMMAND
(cont.)
Description
@PJL SET
The SET command allows the user to change
[LPARM : personality]
the value of PJL Current variables for the
Variable = value
length of a PJL job, or until a PJL reset
condition returns the value to ist default.
Personality : PCL, HEXDUMP
For supported variablews and values see
table:
A-2.1.4 PJL Variables and Values
@PJL RDYMSG ["text of
Display a message in the 1 line of the
message”]
printer´s operator panel
st
The message length is at max. 16 characters
The printer remains online
@PJL RDYMSG ["”]
Clear the message on the printer´s operator
panel
@PJL OPMSG ["text of
Display the message in the 1 line of the
message”]
printer´s operator panel
st
The message length is at max. 16 characters
The printer gets off line
After prompting of this status by pushing the
offline/online button, the printer goes ONLINE
again
A-2.1.4
List of Supported PJL Variables and Values
The following variables can be programmed by the PJL commands:
S
@PJL SET
”variable” = ”value”
S
@PJL DEFAULT
”variable” = ”value”
PJL VARIABLE
VALUES
PROFILE
1, 2, 3, ....., 10
PAPER
A4, LETTER, CUSTOM
PAGELENGTH
3, 3 1/8, ....., 20
in steps of 1/4, 1/6, or 1/8 inch
Note:
value 3 1/6 programming is 3<SP>1/6
LENGTHFACTOR
1, 2, 3, ...., 20
IMAGEWIDTH
0.5, 0.55, ....., 8.25 inch
in steps of 0.05 inch
LENGTHFACTOR
1, 2, 3, ...., 20
ORIENTATION
PORTRAIT, LANDSCAPE
LANDSCAPEMODE
REVERSE, PCLCOMPATIBLE
ORIENTATIONMODE
FIXED, AUTOMATIC
PAPEREXTENDED
NO, YES
