Getting started
Getting started
1-5
1-6
1.2
Installing the Consumables
Installing the Developer Unit
Open the cover (20) by firmly pressing the button (21) at the left top corner of
Gently lift the plastic tabs (24) inside the printer, at the left and at the right side
the printer and swinging the cover up.
of the cover, and pull the front cover (23) in forward direction. The front cover
Remove the polyfoam transport lock (22) inside the printer underneath the
degree angle.
Fuser Unit.
will only open to a 45 degree angle. Please
do not
force this cover beyond a 45
Now the rail guides inside the cabinet are free to accept the Developer Unit.
Remove the Developer Unit (6) from its foil package and turn it so that the
sleeve roller (26) is toward the back of the printer.
Slide the Developer Unit fully into the printer along the plastic rails on the left
and right. To lock push down the two green plastic tabs.
