Getting started
Getting started
1-13
1-14
Installing the OPC Drum
1.3
The Power Supply
The OPC Drum (11) is packed seperately in the Starter Kit. The OPC Drum is
Since an incorrect voltage selection can seriously damage the printer, please
very light-sensitive, so it is wrapped up in lightproof foil. Carefully remove the
pay special attention to the following:
drum from its foil container.
Note:
Do not touch the green part of the OPC Drum with your fingers. Oil and
mains voltage:
dirt degrade print quality.
230 V for 220 to 240 V alternating current
Do not expose the light-sensitive OPC Drum to room lighting or sunlight
any longer than necessary.
Insert the OPC Drum into the printer behind the Developer Unit. Gently press
the top of the OPC unit to make sure it is fully down. The opening for toner
waste is now just over the Waste Toner Container (14).
S
Make sure that the specified voltage on the type plate corresponds to your
S
Connect the printer to the mains using the power cord (34). First connect the
cable to the power cord socket and then to the mains.
Note:
As the power cord serves as a safety cut-off, its connection to the
printer must be accessible any time.
