Technical Data
8-1
8-2
8.
Technical Data
Warm-up Time / Begin of Printing
The technical data specified in this chapter are applicable to a printer equipped
Fuser Control Modes
with a control unit that supports the serial and parallel interface.
S
operating:
The printer keeps the fuser at fusing temperature which is in
8.1
Printer Specification
S
stand-by:
The printer keeps the fuser at stand-by temperature, at
Print Technology
S
idle:
The printer lets the fuser cool to almost ambient
S
Electrophotographic with diode laser
temperature by turning the fuser off.
S
Organic photoconductor (OPC) drum
S
1 1/2 component toner/developer system
Dimensions
S
Heat and pressure fusing with adjustable fusing temperature
460 mm x 248 mm x 498 mm (W x H x D)
Paper Transport
Weight
S
Plane, straight-through paper path
25.5 kg incl. consumables
S
Adjustable, retractable tractor with auto-centering
22.0 kg no consumables
S
Paper top-edge detection
S
No forms waste if last printed page is not torn off
Mains Voltage
Print Image Area
max. width 8.25 inch (210 mm)
Power Dissipation
min. length 3 inch (76.2 mm)
S
operating:
< 1.000 W
max. length 33 inch (838.2 mm)
S
stand-by:
< 300 W
Resolution
300 x 300 dpi
Environmental Conditions
Process Speed
S
storage:
-30 to 60
E
C, 10 to 95% rel. humidity
4.4 inch/s (112.23 mm/s)
Print Speed
(based upon ISO 7779 at the bystander position)
24 pages per minute (ppm) at 11 inch page length
S
operating:
#
53 dB(A)
#
3 min from ambient temperature
after
#
20 s at operating temperature
after
#
30 s from stand-by
the range of 165
E
C to 185
E
C.
approx. 165
E
C.
220 - 240 V AC, 50 Hz
S
idle:
#
40 W
S
operating:
10 to 32.5
E
C, 20 to 80% rel. humidity
Noise Level
S
stand-by:
#
47 dB(A)
