PSC Falcon PT40, Руководство по продукции

Страница: 57 / 122

Using XFER32
Product Reference Guide
3-5
Transfer Tab
Select the
Transfer
tab to establish file transfer settings.
Figure 3-3. Transfer Tab of the File Transfer Utility
Crash Recovery
NOTE:
ZModem
Protocol is NOT supported by the Falcon PT40.
This feature is only available with
ZModem
protocol.
Sender Timeout
(Seconds) Enter the maximum number of seconds to wait for a connec-
tion when sending files. A value of
0
waits indefinitely.
Receiver Timeout Enter the maximum number of seconds to wait for a connec-
tion when receiving files. A value of
0
waits indefinitely.
Path/Filename
Transmission
NOTE:
ZModem
Protocol is NOT supported by the Falcon
PT40. This feature is only available with
ZModem
protocol.
Overwrite Select to determine the action the receiver takes when a
received file already exists.
Source Longer or
Newer Overwrites the existing file if the received file is longer or
newer.
CRCs Don’t
Match Overwrites the existing file if the CRCs of both files don’t
match.
Append Appends the received file to the existing one.
Always Overwrites the existing file with the one received.
Source Newer Overwrites the existing file if the received file is newer.
Date/Length
Don’t Match Overwrites the existing file if the dates or lengths of both
files don’t match.
Never Skips the transfer if the received file already exists.
2340.book Page 5 Wednesday, January 29, 2003 12:50 PM