INCLINEO handbook
19
Press (HOLD) to take and save the measurement or press
ENTER
to exit.
After the measurement has taken place, the display below appears indicating that the
measurement has been saved in the selected storage location.
The 3 options available after measurement are “ok”, “retry” and “exit”. The required
option is selected using or , then confirmed by pressing
ENTER
.
!
When “ok” is selected and confirmed, the measurement is saved.
!
When “retry” is selected and confirmed, measurement is repeated.
!
When “exit” is selected and confirmed, measurement is abandoned.
The memory submenu item “auto” is used for the automatic recording and saving of
a definite number of measurements. The submenu item is accessed using
or
while in “Memory”.
With “auto” displayed, press
ENTER
. The selection of the data storage location is
prompted as shown below.
Use
or
to cycle through the storage locations. Select measurement storage
location by pressing
ENTER
. This prompts the display of number of readings to be taken.
Содержание INCLINEO
Страница 1: ...INCLINEO handbook 1 INCLINEO Operating handbook ...
Страница 2: ...INCLINEO handbook 2 ...
