PRÜFTECHNIK INCLINEO, Руководство по эксплуатации

Страница: 27 / 48

INCLINEO handbook
27
Relative measurement
It may be necessary to know the relative inclination of different surfaces. This is carried
out using the relative measurement method.
1. Place INCLINEO on the selected reference surface and switch the system on.
It is recommended that the displayed value be set as close to zero as possible.
You may use the rotating inclinometer assembly and the micrometer screw.
2. Press
ENTER
to access the menu items. “Relative Meas”appears on the display (if not
use or to select it).
3. Press
ENTER
to access the submenu items.
4. Use or to select “set zero”.
5. Press
ENTER
to proceed to set the reference value.
6. After measurement, the collected value is displayed. Readings taken henceforth
are relative to the reference value.
!
Note
It is recommended that the displayed value be set as close to zero as possible.
You may use the rotating inclinometer assembly and the micrometer screw.
COMPUTER SENSOR GAUGE
Type
www.pruftechnik.co m
Made in Ger
m
any
s.No.
HW
BATTERY
ON OFF
1
2
4 5