INCLINEO handbook
29
4. After attaining a near zero value, press
ENTER
then use or to select “Relative
Meas”.
5. Press
ENTER
to access the submenu items and use or to select “set zero”.
6. Press
ENTER
to confirm selection.
After set-up is completed, the inclinometer assembly must never be rotated. All
related measurements must be taken using only this set-up.
7. Now proceed to carry out relative measurements.
In this configuration, the system can be used to measure the relative inclination of
surfaces with any inclination with an increased accuracy.
After set-up is completed, the inclinometer assembly must never be rotated. All
related measurements must be taken using only this set-up.
!
Note
Содержание INCLINEO
Страница 1: ...INCLINEO handbook 1 INCLINEO Operating handbook ...
Страница 2: ...INCLINEO handbook 2 ...
