Introduction
10
Access Point Overview
Figure 1: Harmony 802.11a Access Point Model 8569/8570
Top Panel LEDs
The top panel LEDs are (from left to right) the Status
Wireless
and
Ethernet
LEDs.
Status LED
The Status LED gives information about the Access Point.
Status LED
LED Behavior
Indication
Off
Unit not powered on
Lit solid amber
Unit is initializing or is not partnered with an
AP Controller
Blinking amber
Unit needs new firmware
Lit solid green
Unit is operational and partnered with an
AP Controller
Blinking green
Unit is operating in Independent mode
(without an AP Controller)
Blinking red
Problem with unit
