Configuration
26
Note:
To check a computer’s IP address assignment, open a Command Prompt
window and type
ipconfig
.
4.
If you are using a computer equipped with an 802.11a wireless adapter, be sure it
is configured to connect to an Access Point as follows:
• SSID:
any
• Mode:
Infrastructure
• Security Level:
No Security
5.
Open a Web browser such as Microsoft Internet Explorer 5 on the computer.
6.
In the
Address
box, enter the IP Address of the Access Point (such as 192.168.0.2)
and press
Enter
.
7.
The Status screen of the Harmony 802.11a Access Point’s Web configuration tool
appears.
Note:
If a message appears that states: “Please use an Access Point Controller to
manage this Access Point,” you either have an AP Controller on the network
or the AP is looking for an AP Controller. If you just rebooted the AP, wait
until the AP’s Status LED blinks green and then type in the AP’s IP address
again.
8.
Select either the
Configure
or
Statistics
tab at the top of the screen.
