Configuration
31
•
Restrict Read-Only Community to IP:
Enter an IP address in this field to specify
the only SNMP Manager permitted access to the AP’s Read-Only Community. A
value of 0.0.0.0 means that there is no restriction; any IP address can access the
community.
•
Read-Write Community
: This parameter specifies a community supported by the
Access Point. Actions permitted by this community are read-write (GET,
GET-NEXT, and SET). By default, the community is set to “private.”
•
Restrict Read-Write Community to IP:
Enter an IP address in this field to specify
the only SNMP Manager permitted access to the AP’s Read-Write Community. A
value of 0.0.0.0 means that there is no restriction; any IP address can access the
community.
•
Trap Community
: This parameter specifies the community that will be used by the
Access Point when generating traps to send to an SNMP manager. By default, the
community is set to “trap.”
•
Send Traps to IP
: This parameter specifies the IP address of the SNMP manager in
the Trap Community to which the Access Point will send traps. A value of 0.0.0.0
disables trap generation.
Radio
The Radio configuration screen offers dynamic configuration fields for the 802.11a
radio parameters, including Channel, Security, and SSID.