Prowinch PWR M5 Series Скачать руководство пользователя страница 15

Страница: 15 / 95

Safety Precautions

Version 1.0

| 15 |

Before using equipment:

During Operation:
ALWAYS

NEVER

•

Read and understand instructions in this User Manual and labels associated with hoist before operating

equipment.

•

Wear appropriate clothing: Do not wear jewelry or loose clothes as they might get attached to chain or

hook.

•

Wear leather gloves.

•

Wear non-slippery safety shoes, helmet, and eye protection.

•

Perform full check of hoist. Check for damaged parts or unusual characteristics. Keep a safe distance:

suggested distance is at least 1.5 times length of hoist’s chain. Broken or loose chain may cause injuries or death.

•

Check hoist and chain are properly lubricated.

•

Secure electric chain hoist to a suitable support.

•

Visually inspect all electric chain hoists in addition to regular and maintenance inspections

•

Refer to maximum load capacity displayed on ID plate of hoist, not capacity of hook.

•

Stop operation immediately if unauthorized personnel enter working area.

•

Check state of hoist: If engine gets too hot, stop hoist and let it cool for a while.

•

Stop, check, and secure load if hoist stops or loses movement during operation.

•

Focus on operation. Pay attention at all times and keep proper balance.

•

Unplug hoist after operation.

•

Exceed maximum load capacity.

•

Operate damaged or malfunctioning hoist.

•

Operate hoist if behaving unusually.

•

Lift, support, transport people, or lift or support loads over people.

•

Walk over chain.

•

Operate electric chain hoist with twisted, kinked, damaged or worn load chain.

•

Use load chain as a sling around load.

•

Operate a hoist if ID plate or safety labels are missing or illegible.

•

Operate electric chain hoist when exposed to rain or water.

•

Use if operator is sick or not completely attentive.

Содержание PWR M5 Series
































































































Результаты поиска

Содержание PWR M5 Series

Отзывы:

Похожие инструкции для PWR M5 Series

Бренды по названию

Популярные бренды

Prowinch PWR M5 Series, Руководство пользователя

Результаты поиска

Содержание PWR M5 Series

Отзывы:

Похожие инструкции для PWR M5 Series

Бренды по названию

Популярные бренды