Prowinch PWR M5 Series Скачать руководство пользователя страница 10

Страница: 10 / 95

Version 1.0

tion, and enforcement of appropriate safety directives.

The equipment covered by the B30 Standard is subject to hazards that cannot be abat-

ed by mechanical means, but only by the exercise of intelligence, care, and common

sense. It is therefore essential to have personnel involved in the use and operation of

equipment who are competent, careful, physically and mentally qualified, and trained

in the proper operation of the equipment and the handling of loads. Serious hazards

include, but are not limited to, improper or inadequate maintenance, overloading,

dropping or slipping of the load, obstructing the free passage of the load, and using

equipment for a purpose for which it was not intended or designed.

Failure to Read, Understand and Follow the information in the corresponding ASME

B30 Standard for your Hoist and Lifting equipment may result in severe INJURY or

DEATH. It is YOUR RESPONSIBILITY to consider all risk factors and follow all the

equipment related ASME B30 standard, which comprises the following volumes:

B30.1 Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries.

B30.2 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder,

Top Running Trolley Hoist).

B30.3 Tower Cranes.

B30.4 Portal and Pedestal Cranes.

B30.5 Mobile and Locomotive Cranes.

B30.6 Derricks.

B30.7 Winches.

B30.8 Floating Cranes and Floating Derricks.

B30.9 Slings.

B30.10 Hooks.

B30.11 Monorails and Underhung Cranes.

B30.12 Handling Loads Suspended From Rotorcraft.

B30.13 Storage/Retrieval (S/R) Machines and Associated Equipment.

B30.14 Side Boom Tractors.

B30.15 Mobile Hydraulic Cranes.

B30.16 Overhead Hoists (Underhung).

B30.17 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung

Hoist).

B30.18 Stacker Cranes (Top or Under Running Bridge, Multiple Girder With Top or

Under Running Trolley Hoist).

B30.19 Cableways.

B30.20 Below-the-Hook Lifting Devices.

B30.21 Lever Hoists.

B30.22 Articulating Boom Cranes.

B30.23 Personnel Lifting Systems.

B30.24 Container Cranes.

B30.25 Scrap and Material Handlers.

Safety Bulletin

Содержание PWR M5 Series
































































































Результаты поиска

Содержание PWR M5 Series

Отзывы:

Похожие инструкции для PWR M5 Series

Бренды по названию

Популярные бренды

Prowinch PWR M5 Series, Руководство пользователя

Результаты поиска

Содержание PWR M5 Series

Отзывы:

Похожие инструкции для PWR M5 Series

Бренды по названию

Популярные бренды