Anti-lock Braking System (ABS)
[Advanced Level]
This advanced anti-lock braking system is featured when the programming level is
set to Advanced Level. ABS works as a pulse brake, allowing greater stability and
control during hard braking. The pulse width ("on" time versus "off" time) is called
duty, the pulse height (how hard the brakes pulse) is called width, and the braking
point where ABS actually begins is called position. A delay can be programmed so
that regular braking occurs first, then at a pre-set delay ABS braking begins.
1. Press button until the cursor is at ABS.
2. Press button to display the ABS screen.
3. Press / button until desired value appears on width.
4. Press to confirm the value or to cancel and retain previous value.
5. Press to move to next field and repeat steps 3 & 4 to set the remaining
parameters; Position, Cycle, Delay and Duty.
6. Press button to return to the Circuit menu.
width
A
B
Position
cycle
A : B = Duty
Start
Max
EPA
Response
Start / Idle up
DBA
Circuit mode
Servo speed
ABS
SST
Width
Position B
Cycle
Delay
Duty
[ ABS ]
00
00
00
00
00
Data Setting & Programming
29
NOTE
is displayed on the LCD when ABS is activated.
ABS
