Proton 2 Channel FM Radio Control System, Руководство пользователя

Страница: 24 / 39

Max
Servo
Angle
Neutral Max
Steering / Throttle Angle
+100%
0%
-100%)
0
EPA
Response
Start / Idle up
DBA
Circuit mode
Servo speed
ABS
SST
Steering +10%
Th forw -10%
brake +10%
[ Response ]
Response Sensitivity
[Basic, Intermediate & Advanced Level]
Also known as the Exponential adjustments, this function is used to change the
sensitivity of the steering and throttle servos around the neutral position. It has no
effect on the maximum servo travels. For the throttle servo, the function changes
the sensitivity of the throttle servo in the throttle trigger forward side and brake side
directions independently.
1. Press button until the cursor is at Response.
2. Press button to display the Response screen.
3. Press / button until the desired response value appears on Steering.
4. Press button to set or button to cancel and retain previous setting.
5. Press and repeat steps 3 & 4 for Throttle forward and brake Responses
6. Pressing button returns to the Circuit Mode menu.
Data Setting & Programming
24
Max
Servo
Angle
Neutral Max
Steering/Throttle Angle
100%
0
EPA
Response
Start / Idle up
DBA
Circuit mode
Servo speed
ABS
SST
Steering 10%
Tg forw 5%
brake 8%
[ DBA ]
Dead Band Adjustment (DBA)
[Basic, Intermediate & Advanced Level]
The EDB is available for Throttle and Steering. For throttle, DBA can be made to
reduce or eliminate the dead throttle area that exists from neutral to the starting
point of throttle and from neutral to the starting point of braking. As more throttle
trim (also known as static brake) is applied, more of the dead trigger area is created.
Adjust a forward value such that your vehicle's wheels just start to turn when the
trigger is slightly squeezed. This gives the most accurate feel as the dead area is
eliminated. This feature is also available for steering. Sometimes known as the
punch, DBA can eliminate dead band band around neutral area.
1. Press button until the cursor is at DBA.
2. Press button to display the DBA screen.
3. Press / button until the desired value appears on Steering position.
4. Press to confirm the change or press to cancel.
4. Press and repeat steps 3 & 4 for DBA oon Trigger forward and brake.
6. Press button returns to the Circuit menu.