Model 1: SPEED
Level Basic
Servo
Reset NO
Pit mode
Reverse St : NOR
Th : NOR
Sub trim R06
F06
[ Servo ]
Model 1: SPEED
Level Basic
Servo
Reset NO
Pit mode
Reverse St : NOR
Th : NOR
Sub trim R06
F06
[ Servo ]
Servo Reverse
This function allows you to change the direction a servo rotates, clockwise or
counter clockwise, for Steering and Throttle independently.
NOTE
When Servo Reverse is selected, the direction of the trim position deviation, if any,
will also be reversed.
1. Press button until the cursor is at Servo.
2. Press button to display Servo screen.
3. Press / button to change steering servo rotation direction.
(Press button to complete setting or button to return to previous setting.)
4. Press and / button to change throttle servo rotation direction.
(Press button to complete setting or button to return to previous setting.)
5. Pressing button returns to the Mode menu.
Sub Trim
Use this function to adjust the neutral position of the steering and throttle.
NOTE
Sub trim changes both the center and the end point servo positions. You may want to
recheck your end point positions if you adjusted the Sub Trim. Do not use excessive Sub trim,
as it's possible to over-run the servo's travel. Instead reposition the servo horn or servo saver
on the servo and inspect your linkage installation.
1. Press button until the cursor is at the Servo.
2. Press button to display the Servo screen.
3. Press button until the cursor is at sub trim steering value.
4. Press / button to change sub trim value of steering.
(Press button to complete setting or button to return to previous setting.)
5. Press and / button to change sub trim value of throttle.
(Press button to complete setting or button to return to previous setting.)
6. Pressing button returns to the Mode menu.
21
Data Setting & Programming
