Idle Up
[Intermediate & Advanced Level]
The Idle up function is normally used to advance the throttle position slightly,
making it easier to start gas cars. To program;
1. Press button until the cursor is at Idle Up.
2. Press button to display the Idle Up screen.
3. Press / button until the desired value appears on throttle position.
(Press button to set or button to cancel and retain previous setting.)
4. Press button returns to the Circuit Mode menu.
Pressing the Idle up button " " on the control panel can activate this function,
the throttle servo will offset to the programmed position, and will appear on
the lower side of the normal LCD display.
NOTE
Idle up is available only at first triggering. For activating, press Idle up button on the
control panel again.
EPA
Response
Start / Idle up
DBA
Circuit mode
Servo Speed
ABS
SST
Start rate 50
Tg point F05
Idle rate F10
[ Start / Idle up ]
Data Setting & Programming
25
IDL
Idle up
Start Rate
[Intermediate & Advanced Level]
This feature allows for smooth and even acceleration under adverse conditions,
such as slippery circuit. When the start function is activated, merely operating the
throttle trigger passing the preset Trigger point causes the throttle servo to
automatically operate at programmed Start rate. We recommend you try out the
function with various values of Start rate and Trigger point to find the optimum
point at which the tries do not loose their grip and the car accelerates smoothly, To
Program;
1. Press button until the cursor is at Start / Idle up.
2. Press button to display the Start screen.
3. Press / button until desired value appears on Start rate, and press
confirm
4. Press and / button until desired value appears on trigger point forward.
(Press button to set or press button to cancel and retain previous setting.)
5. Press button return to the Circuit Mode menu.
To activate press the start button " " on control panel, and
will appear on
the lower side of the normal LCD display.
NOTE
The Start function is only available at the very first triggering. To activate it again for
the next run, press the start button on the control panel again.
EPA
Response
Start / Idle up
DBA
Circuit mode
Servo speed
ABS
SST
Start rate 40
Tg point F05
Idle rate F10
[ Start / Idle up ]
STA
Start
