RAIL
™
BOLT
ASSEMBLY AND MAINTENANCE
When the RAIL™ is fired the solenoid is actuated
and the air inside the Can is exhausted out. The
force created by the air inside the supply chamber
causes the bolt to start moving forward. Once the
bolt has moved about half way forward, the tail of
the bolt closes the input into the supply chamber.
Once the Bolt reaches the forward point, the valve
of the RAIL™ Bolt is opened and air inside the
supply chamber goes through the Bolt and fires
the paintball. After this the solenoid is de-
activated and gas is supplied through the
solenoid back into the Can. This causes the Bolt
to return to the back position and the supply
chamber to be re-charged.
When servicing your marker:
• Make sure your hopper is removed from the marker.
• Make sure there are no paintballs in the breech of the marker.
• Always remove the air supply and relieve all gas pressure in the marker
before disassembly.
• When using the marker in temperatures below 50° Fahrenheit it may be
necessary to lube the RAIL™ bolt more frequently.
W
W
W
.
P
R
O
T
O
P
A
I
N
T
B
A
L
L
.
C
O
M
15
