BOARD SETTINGS AND CONFIGURATION MODE
There are five settings you can alter on the RAIL™ board with
the DIP switches inside the grip frame (see figure 1):
ABS
Anti Bolt Stick.
Trigger Sensitivity
This setting adjusts the delay
between two trigger pulls.
Dwell
This is the time the solenoid is
activated for.
Rate Of Fire
This setting is for adjusting the
maximum rate of fire
Firing Mode
This is the firing mode the RAIL™ uses.
There are two DIP switches mounted on the board of the RAIL™ (See figure 1). The first one is
used for the ABS setting and the second one is used to access a configuration mode which
changes the other four settings.
Anti Bolt Stick
- When ABS is activated, the dwell is increased after
15 seconds of non-use for the next shot fired. This helps to prevent
bolt-stick, but may result in higher velocity for the first shot.
FIGURE 1
ABS ON
(DEFAULT)
ABS OFF
RAIL
™
BOARD
SETTINGS AND FUNCTIONS
W
W
W
.
P
R
O
T
O
P
A
I
N
T
B
A
L
L
.
C
O
M
8
