93-520-20 Issue 3.3
Page 30 of 60
CirrusPro Engineer’s Manual
3.3
Handling Detector Unit Data (The Network Menu)
3.3.1 Saving Data
Any changes in the set up of a unit must be downloaded to it; this has to be done manually from the
menu but is prompted when closing the connection where changes have not been saved.
Any attempt to close the PC program, when changes have been made, displays a prompt:
Selecting ‘Yes’ will leave the connection without saving the changes.
To ensure the data is as stored in the unit, i.e. to lose changes: ‘
Get Information from Unit
’, restart
the program or connect to another unit first. Any of these force a complete reload of the data.
Selecting ‘No’ leaves the system in the program mode so changes can be saved via the Network
Menu option ‘
Send Information to Unit
’.
Select ‘Send information to Unit’
After pressing OK the data is transferred to the unit and this action is confirmed.
‘Restore Factory Defaults’
does this after the warning (See Section 1.2 for default settings)
