Protac PRoX-2622, Руководство пользователя

Страница: 34 / 91

Chapter 3 Software Configuration
Prox-2622 USER
′
S MANUAL
Page:3-3
3-1-2. Installation of VGA Driver for PCI
1. Install VGA Driver to Windows 9x
(1). Click START, SETTINGS, then CONTROL PANEL.
(2). On CONTROL PANEL, click the DISPLAY icon and enter
the SETTINGS tab of the DISPLAY PROPERTIES window.
(3). Select the SETTINGS page, push the CHANGE DISPLAY
TYPE button. Click the CHANGE button in the “Adapter
Type” area.
(4). Push the “HAVE DISK BUTTON” and press OK.
(5). Specify the path for the new driver and press the <Enter> key.
The “Select Device” dialog box will appear. Select the
“Silicon Motion Lynx3DM”.
(6). Follow the remaining instructions that appear on the screen to
complete the rest of the installation, and then restart your
computer.
2. Install VGA driver to Windows NT 4.0
(1). To install VGA drivers to Windows 4.0 is as you normally
would. Click START, then SETTINGS, then CONTROL
PANEL of the operating system.
(2). Select the DISPLAY icon to start the DISPLAY
PROPERTIES window, then choose the SETTING tab, then
DISPLAY TYPE.
(3). In the CHANGE DISPLAY TYPE window, click on the
CHANGE button in the ADAPTER TYPE, this will bring up
the SELECT DEVICE window.
(4). In the CHANGE DISPLAY window, click on Have Disk.
Follow the instructions appearing on the screen until you
complete the whole installation.
(5). Once installation is completed, the system must be shut down
and restarted for the new drivers to take effect.