Protac PRoX-2622, Руководство пользователя

Страница: 49 / 91

Chapter 5 Award BIOS Setup
Page: 5-6
Prox-2622 USER
′
S MANUAL
PRECOMP:
Precomp is the read delay circuitry which takes into account the timing
differences between the inner and outer edges of the surface of the disk
platter. The number designates the starting cylinder of the signal.
LANDZ:
Landzone is the landing zone of the heads. This number determines the
cylinder location where the heads will normally park when the system is
shut down.
SECTOR:
This is the number of sector found in the specified drive type.
DRIVE A AND DRIVE B:
The category identifies the type of floppy disk drive A or drive B that have
been installed in the computer. The available options are as follows:
None No floppy drive installed.
360KB 5.25in 5-1/4 inch PC type standard drive;
360 kilobyte capacity
1.2KB 5.25in 5-1/4 inch AT type high-density drive;
1.2 MB capacity
720KB 3.5in 3-1/2 inch double-sided drive; 720 KB capacity
1.44MB 3.5in 3-1/2 inch double-sided drive; 1.2 MB capacity
2.88MB 3.5in 3-1/2 inch double-sided drive; 2.88 MB capacity
VIDEO:
The category selects the type of video adapter used for the primary system
monitor. Although secondary monitors are supported, you do not have to
select the type in Setup. The available options are as follows:
EGA/VGA Enhanced Graphics Adapter/Video Graphics Array.
For EGA, VGA, SEGA, SVGA or PGA monitor
adapters.
CGA 40 Color Graphics Adapter, power up in 40 column mode.
CGA 80 Color Graphics Adapter, power up in 80 column mode.
MONO Monochrome adapter, includes high resolution
monochrome adapters.