RLXIC-SV
♦
Intelligent Cellular
Configuring Modbus/BSAP
RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network
User Manual
Page 84 of 146
ProSoft Technology, Inc.
May 29, 2009
MD13
: Modbus ASCII
MD23
: Modbus RTU (Binary)
MD33
: BSAP
MD63
: Variable Modbus - individual parameters are set up manually.
9.2.3 Configure IP addresses for the Modbus IDs.
The last step of configuring the modem at the host is setting the IDs to their
specific IPs. In AceManager, select the menu option
A
DDR
L
IST
.
Addresses can be entered in decimal or hex. AceManager will translate hex
entries into decimal. The number before the "=" is ID, the number after is the IP
address. There can be a total of 100 remote ID/Local addresses entered into the
modem.
When using AT commands via telnet or direct serial connection, use ATMLIST
for decimal IDs, and ATMLISTX for hexadecimal. For example, if the ID is 27,
and the IP is 123.123.123.124, you would enter it as
ATMLIST27=123.123.123.124 or ATMLISTX1B=123.123.123.124.
9.2.4 Optional:
Dynamic
IP
Address
If you do not have a static IP, the host modem should be configured to report its
current IP to a Dynamic DNS (DDNS) server with IP Manager.
In the Host modem's configuration, instead of IP address for the Addr List
(ATMLIST or ATMLISTX), substitute a single unique name for each modem, that
is, remote1, remote2, etc.
When you configure IP Manager for the host modem, make note of your modem
name and domain setting in AceManager in the menu selection
D
YNAMIC
IP
to be
used with the remote modems.
