RLXIC-SV
♦
Intelligent Cellular
Activating your RLXIC-SV on your cellular provider
RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network
User Manual
Page 22 of 146
ProSoft Technology, Inc.
May 29, 2009
Note:
The process may take a few minutes. Progress information will display across the bottom.
Tip:
If you have low signal, you may encounter difficulties activating your modem. Try a different
location or a different antenna to increase your signal if it is -90 or lower (yellow to red bar).
3.1.6 Test
Modem
Setup
Your connection of your RLXIC-SV to the Internet is tested using the your cellular
provider cellular network.
Green checks in the boxes indicate the tests were successful and your RLXIC-
SV is functioning properly. At this point your modem is configured and activated
to work on the your cellular provider network.
Note:
These tests, depending on the strength of your signal, may take a few minutes. Initially,
while the tests are being performed, there may be red
X
s in the boxes. The Status line will give an
indication of the progress of the connection process.
If Test Modem Settings shows the status of your modem is "Data Connection
Failed - Waiting for Retry", "No Service", "No Carrier", "Network Negotiation
Failed", "Network Authentication Failed", "Modem Not Registered", or the Reg
Net light on the modem is not lit, double-check your device activation information
and return to the Activate Modem step to reconfigure your RLXIC-SV.
