Configuration Commands
RLXIC-SV
♦
Intelligent Cellular
User Manual
RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network
ProSoft Technology, Inc.
Page 119 of 146
May 29, 2009
*HOSTNETMASK=n.n.n.n
Subnet mask for the host interface. Allows communication with a subnet behind
the host interface.
n.n.n.n = subnet mask
, example 255.255.255.0.
*HOSTPEERIP=d.d.d.d
Set or query the IP address that can be used to directly contact the RLXIC-SV
after a cellular connection is established. If this value is not specified,
192.168.13.31 will be used.
d.d.d.d=local or peer IP address
of the modem.
Note:
This is not normally used nor needed by user applications.
*HOSTPRIVIP=d.d.d.d
Set or query the private IP address that is to be negotiated by the 1x connection
if *HOSTPRIVMODE =1.
d.d.d.d=IP Address
*HOSTPRIVMODE=n
Set or query whether a private or public (network) IP is to be used when the Host
initiates a 1x connection to the modem.
n=0
: Public (network) IP Mode: When the Host initiates a PPP connection,
the host will be given the network IP address that was obtained from the
cellular carrier while registering on the network. If the network issues a new
IP address, the cellular connection will be closed (because the IP address
has changed) and has to be re-initiated. (default).
n=1
: Private IP Mode: When the Host initiates a 1x connection, the host will
be given the IP address specified in *HOSTPRIVIP. The modem will then
perform 1 to 1 NAT-like address translation, which shields the Host from
network IP changes.
*HOSTPW=string
Host Password for PAP or CHAP.
string=password
*HOSTUID=string
Host User ID for PAP or CHAP.
string=user id
(up to 64 bytes)
