RLXIB-IHN
♦
802.11n
RadioLinx Configuration Manager
Industrial Hotspot
User Manual
ProSoft Technology, Inc.
Page 83 of 171
May 23, 2011
Traps List
This table lists IP addresses of SNMP agents to which the device will send trap
messages and allows several operations on the SNMP agents.
Parameter Description
IP Address
The IP Address of the SNMP manager or trap agent.
Port
The SNMP trap port of the IP address to which the trap messages will
be sent (typically UDP port 162).
Community
The community string associated to the agent. Most agents are
configured to listen for traps in the Public community.
SNMP Version
SNMP protocol version used by the defined trap agent.
Edit
Opens the SNMP Trap Configuration page, allowing you to make
changes to the selected SNMP Agent.
The actions that can be taken on SNMP agents are:
Parameter Description
Select All
Selects all the SNMP agents in the table.
Delete
Deletes the selected SNMP agent or agents.
Add
: Clicking this button will link to the SNMP Trap Configuration page.
SNMP Access Control Configuration
This configuration page allows you to add or modify an access control rule for a
given SNMP manager or trap agent as identified by its IP address and
community.
Parameter Description
IP Address
The IP Address of the specific SNMP manager or trap agent on which
to create an access rule
Subnet Mask
The network mask used to determine the list of allowed SNMP
managers.
Community
The community string associated to the agent. Most agents are
configured to listen for traps in the Public community.
Access Type
The SNMP manager or trap agent can either be allowed to read and
modify all SNMP accessible settings (
rwcommunity
) or be given read-
only access (
rocommunity
).
Click
Apply
to save your changes.
Click
Clear
to discard your changes.