RLXIB-IHN
♦
802.11n
RadioLinx Configuration Manager
Industrial Hotspot
User Manual
ProSoft Technology, Inc.
Page 67 of 171
May 23, 2011
Parameter
Description
Stale Time
Enter the maximum age in seconds (1 to 60, default 15 seconds) to
remove an entry from the Available Parent List if a beacon frame is not
received within the stale time.
Dwell Time
Enter the time in milliseconds (1 to 1000, default 15 milliseconds) that
the radio should scan each channel for parents.
Scan Rounds
Enter the number of times (1 to 5, default 2 rounds) the non-associated
repeater or client should scan all available channels to populate the
Available Parent List, before it connects to a parent candidate.
Selection Frequency
Enter the time in seconds (0.1 to 10 seconds, default 1 second) to
check for another parent candidate while the radio is already associated
to a parent.
Strong RSSI Threshold
Enter the RSSI value (-100 to -20 dBm, default -60 dBm) above which a
stronger signal is not beneficial in the cost calculation for an available
parent.
RSSI Averaging Factor
Enter a value from 2 to 128 to determine how long to average the RSSI
measured from a potential parent. Default is 32.
Hysteresis
Enter a value from 1 to 10 dBm (default 3 dBm) to adjust the preference
given to the current parent to prevent inadvertent switching between
parent radios.
Click
Apply
to save your changes.
Click
Clear
to discard your changes.
Available Parents List
This page displays the list of available parents for this RLXIB-IHN radio. This
page does not apply to a radio configured as a Master.
Select (check) the
F
ILTER BY MY
SSID
checkbox and click
A
PPLY
to restrict the list
of available parents to those with the same SSID as the radio you are
configuring.
Both the selected parent and all other potential detected parents will be listed. A
green dot in the leftmost column indicates the selected parent.