MVI69-PDPMV1
♦
CompactLogix or MicroLogix Platform
Module Setup
PROFIBUS DPV1 Master
User Manual
ProSoft Technology, Inc.
Page 67 of 225
July 8, 2011
To view or print the Processor Network Memory Map
1
On the
Master Setup dialog
box, click the
S
HOW
M
EMORY
M
AP
button, near
the bottom of the window. This action opens the
inRAx Data Type
dialog box.
2
Notice that there are buttons in the
Display
area of the dialog box to show
inputs and outputs. These input and output maps correspond to the input and
output data you configured for the
PROFIBUS slaves.
Notice also that there
are check boxes to display slot numbers and PROFIBUS addresses.
3
Click
P
RINT
to print the input and output maps for reference. Note that you
must do this for both input and output maps.
4
When you have finished printing the processor memory maps, click
OK
to
close the dialog box. Click
OK
again to close the
Master Setup
dialog box.
5
Keep the printed memory maps on hand. You must refer to them when you
configure the sample ladder logic in RSLogix. The sample ladder logic
contains input and output arrays that must be cross-referenced with the
variables.
The next step is to download the project to the MVI69 module.
