manualshive.com logo in svg

ProSoft Technology inRax MVI69-PDPMV1, Руководство пользователя

Поделиться
Скачать
ProSoft Technology inRax MVI69-PDPMV1 Скачать руководство пользователя страница 16

Start Here 

MVI69-PDPMV1 

♦

 CompactLogix or MicroLogix Platform 

User Manual 

PROFIBUS DPV1 Master 

 

 

Page 16 of 225 

ProSoft Technology, Inc. 

 

July 8, 2011 

 

 

1.5 Installing 

the 

Module 

 

Before you attempt to install the module, make sure that the bus lever of the 
adjacent module is in the unlocked (fully right) position. 

 

Warning: This module is not hot-swappable!

 Always remove power from the rack before 

inserting or removing this module, or damage may result to the module, the processor, or other 
connected devices.  

 

1 

Align the module using the upper and lower tongue-and-groove slots with the 
adjacent module and slide forward in the direction of the arrow. 

 

2 

Move the module back along the tongue-and-groove slots until the bus 
connectors on the MVI69 module and the adjacent module line up with each 
other. 

Содержание inRax MVI69-PDPMV1


































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды