OPERATING SPECIFICATIONS
Maximum temperature: 49°C, 120°F
Minimum temperature: 1°C, 34°F
Maximum line pressure: up to 125 psi (8.61 Bar)
Maximum vacuum: 140mmHg, 5.5” Hg
Maximum recommended service flow rate: 7gpm
SYSTEM SPECIFICATIONS
Overall size: 3 stage tank assembly w/rack size: 25” X 10” X 28”
Tank size: 7” x 17” each
Overall size: stage 4 ElectroCharged™ Sub-micron filter assembly: 7” x 15”
Complete system weight: 65 lbs
Port size: ¾” INLET and OUTLET
Push fit connectors: ¾” for PEX (with tube supports), CPVC or Copper
Expected capacity: 50,000 gallons or up to 1 year (dependent on specific water source and usage)
For well water application check iron level. Above .3 mg/I, call for information as this may require a
water softener.
Pre-sediment filter (optional): When sediment may be of concern, we recommend the installation of a
Pre-sediment filter assembly. Item # PH-PRE filter assembly. Recommended filter cartridge replacement up
to 6 months or as needed.
Depending on your specific water condition, Propur® offers additional “Pre” or “Post” add-on optional filters.
Please contact Propur® Technical Support should you have questions about your specific needs.
Replacement Filters:
3 stage filter tank assembly – item# PH-1000RTA
ElectroCharged™ Sub-micron filter cartridge – item# PH-EC-RF
Pre-sediment 5 micron filter cartridge – item# PH-PRE-RF