Amaircare® ET Annual Filter Kit Super Standard Installation Instructions for Models 2500 and 3000 (2016) NA
A N N U A L F I LT E R
K I T - S U P E R S T A N D A R D
Installing ET Style replacement filters in Models 2500
and 3000
Open the cabinet
1. Turn the unit off and unplug it.
2. Unscrew the 4 lid screws with a No. 2 Phillips screw driver. Once all
screws are out, remove the metal lid.
3. Bracing the unit so it does not move, gently press down on the
HEPA Cartridge and turn counterclockwise until it unlocks, then lift
the HEPA Cartridge out of the Air Filtration System.
Carbon Prefilter
1. Remove the aluminum clips from the used carbon prefilter,
unwrap it from the HEPA Cartridge and discard.
2. Remove plastic packaging from the new Carbon Prefilter.
3. Wrap the new Carbon Prefilter around the HEPA Cartridge and
secure in place with the aluminum clips.
4. Slide the HEPA Cartridge with new Carbon Prefilter back in the
center of the unit.
5. Gently press down on the HEPA Cartridge and turn clockwise until
it locks into place.
Carbon Inner Blanket
1. Remove the used Carbon Inner Blanket by curling one end of the
filter to the inside. Carefully slide the blanket out from the center
of the HEPA Cartridge.
PREFILTER
HEPA FILTER
VOC BLANKET
VOC CANISTER
1
2
3
4
PREFILTER
HEPA FILTER
VOC BLANKET
VOC CANISTER
PREFILTER
HEPA FILTER
VOC BLANKET
VOC CANISTER
PREFILTER
HEPA FILTER
VOC BLANKET
VOC CANISTER
PREFILTER
HEPA FILTER
VOC BLANKET
VOC CANISTER
PREFILTER
HEPA FILTER
VOC BLANKET
VOC CANISTER
PREFILTER
HEPA FILTER
VOC BLANKET
VOC CANISTER
