Pronk Technologies
2017 07-18
www.pronktech.com
800-541-9802
Page 17
©2015
DataSnap Function Keys
For Laptops use FN key + desired function key to select
Description
F2-Help
Legend for all DataSnap Hot Keys
F3-Reset Flow
(Alt-Z)
Clear prior Test Results on FlowTrax
F4-Insert Volume
(Alt-V)
Request Volume Results
F6-Insert Max. Pressure
(Alt-P)
Request Maximum Pressure (Occlusion Pressure)
F7-10s Stream Data ON
Request Real time data for rate and volume at 10 second
intervals
F8-10s Stream Data OFF
Turn off real time data request
F9-Flush FlowTrax
Put FlowTrax into “Flush” mode for Priming.
FlowTrax Requirements: To connect FlowTrax to your PC for DataSnap capabilities, you will need the following
items:
•
(1) FlowTrax Stereo to USB cable, Part # 501-9918.
•
Install software program TWedge version 3.1. Trial version available on FlowTrax User Guide DVD.
•
Install DataSnap Script onto TWedge program. Located on FlowTrax User Guide DVD.
•
FlowTrax software version 1.6 or higher. Units with software 1.2 or lower will require factory
upgrade.
PC Requirements for TWedge Software
Memory: At least 25 MB RAM per managed device (higher in case of complex data acquisition logic of customized
scripts).
Operating Systems: All current 32 and 64 bit Microsoft Windows systems:
•
Windows Server 2003, 2008, 2008 R2, 2012, 2012 R2, Windows Vista, Windows 7 and Windows 8.
•
For legacy systems like Windows XP or Windows XP based systems (e.g. Windows Embedded and
Windows Embedded POS Ready), TEC-IT provides support only on a voluntary basis (no legal
entitlements).
DataSnap Overview: The TWedge software translates serial data into keystrokes. The DataSnap Script defines the
commands of each Function key. A DataSnap script file is available from Pronk at no additional charge that can be
modified by the user if needed. FlowTrax software version 1.6 or higher is required and can be updated to this
version remotely without sending the FlowTrax back to Pronk Technologies. Units with software 1.2 or lower will
require a factory upgrade.
TWedge Software: The wedge program is called TWedge V3 and is provided by Tec-IT found on the internet at
(
http://www.tec-it.com/software/data-acquisition/twedge/keyboard-wedge/Default.aspx
). A demo version of this
program is available on the FlowTrax User Guide DVD provided with the FlowTrax and can be downloaded to your
PC. Once downloaded to your PC you can purchase a license through Tec-IT over the internet.
DataSnap Script: The Script file defines the action of the Function keys and is also located on the FlowTrax User
Guide DVD provided. It was developed by Pronk Technologies as “shareware” and there is no implied or specific
warranty or support. It can be modified by users where more customization is needed.
