31
Your ProNav software also comes with safety camera warning software. This will provide you with both audible and visual alerts for fixed
safety cameras along your route.
How the Safety Camera software works
The software will automatically provide intelligent audible alerts based on the speed that you are travelling when you are approaching a safety
camera.
These are;
When approaching a safety camera at a speed below the known speed of the camera, then an audible sonar ping will sound every five
seconds up to and through the camera zone.
When approaching a fixed safety camera at a speed above the known speed of the camera, a sharper ping warning will sound for a preset
number of seconds up to and through the camera zone, along with the visual warning (shown above). The warning will tell you the type of
camera ahead (if known), along with the speed of the camera (if known), the camera distances and the bearing on where the safety camera is
approximately located on the road. If you reduce your speed to below that of the known speed of the camera, the sonar ping will replace the
sharp ping noise.
Important: Some camera types, such as mobile or variable limit safety cameras, do not have speed limits associated with them so
you might receive an audible warning for those even if you are driving below the speed limit.
Understanding the Safety Camera Warning
