PRONAR VMP-10, Руководство пользователя, Страница: 29 / 78

3.5
Added top wall (2) is screwed to the edge of tank. Two milling blades were installed in tank
walls. Full assembly of tank rests upon weight stress tensor, which in turn are attached to
bottom frame of the feed car.
3.4 MAIN BRAKE
The feed car VMP-10 was equipped in one of three types of main braking system:
•
Two-pipe pneumatic system - figure ( 3.3A ),
•
Single-pipe pneumatic system - figure ( 3.4A ),
•
Hydraulic braking system - figure ( 3.5A ).
FIGURE 3.3A SINGLE-PIPE PNEUMATIC SYSTEM
(1) air tank, (2) control valve, (3) braking force controller, (4) pneumatic servomotor, (5) pipe
joint (red), (6) pipe joint (yellow), (7) air filter, (8) control joint of air tank, (9) control joint of
pneumatic servomotor, (10) drain hole
1
2
3
8
10
5
6
7
4
9