PRONAR VMP-10, Руководство пользователя, Страница: 16 / 78

2.4
•
Always use oil approved by the manufacturer. Never mix two kinds of oil.
•
After having oil changed, you must utilize old oil.
•
When working with tyres it is necessary to protect the machine against rolling by,
putting wedges under wheels.
•
Repair works regarding wheels or tyres must be performed by professionally trained
and authorised individuals. Those actions must be taken with use of purpose-made
tools.
•
After having the wheel mounted, one must check that all nuts are properly tightened.
Control must be exercised after first use, after first performance with load and then
after 6 months.
•
Control tyre pressure on regular basis.
•
In case of discovering any imperfections regarding operation of the machine or any
damage, you must exclude it from operation until having all problems solved.
•
When taking repair actions you must wear appropriate, well-fitting protective clothing,
gloves and purpose-made tools.
•
Service-repair action must be taken when complying with general work safety rules. In
case of injury rinse and disinfect the wound immediately. In case of severe injury, it is
necessary to consult the physician.
•
Repair, maintenance and cleaning works may be performed only with engine powered
off and ignition key taken out.
•
Verify condition of all screw joints.
•
Before setting about any welding or electrical works, it is necessary to deenergize the
feed car.
•
Within warranty period all repair works may be performed only by warranty service
authorized by the manufacturer.
•
In case of necessity of replacement of particular elements, one must use original
spare parts or approved by the manufacturer only. Non-observance of this rule may
create danger for life and health of operators as well as strangers and contribute to
machine damage.