PRONAR VMP-10, Руководство пользователя, Страница: 18 / 78

2.6
•
Using feed car in several holdings creates danger of expansion of microorganism in
the environment. This threat may me significantly reduced by deep cleaning of the
machine.
•
In case the machine was used for mixing contaminated feeding stuff, it is necessary to
disinfect it in compliance with regulations of local sanitary authorities.
•
The machine must be deep cleaned in case it has not been used for more than three
days.
•
Expansion of bacteria is a normal phenomenon and is more intense when using
foodstuffs for productions feed mixture. Keeping the machine clean is a necessary
condition for keeping animals in good health.
•
Before setting about working with the machine, it is necessary to become familiar with
propeller shaft operating manual provided by the manufacturer and comply with
instructions contained therein.
•
The feed car may only be accoupled with tractor with use of purpose-made telescopic-
joint shaft, recommended by the manufacturer.
•
Propeller shaft must be equipped with protecting covers. It is forbidden to use
propeller shaft with damaged covers or without covers.
•
After having the shaft installed, one must make sure that it is properly and safely
connected to tractor and feed car.
•
Before each start-up it is necessary to make sure that all covers are in full order and
properly mounted. Damaged or deficient subassemblies must be replaced
immediately.
•
It is forbidden to wear loose cloths, loose belts or anything what could wriggle in
rotating shaft. Contact with rotating propeller shaft may end with serious injury.
•
Before disconnecting propeller shaft, one must power off tractor’s engine and take
ignition keys out.
•
In case of working in conditions of limited visibility, telescopic-joint shaft as well the
area around it, ought to be floodlighted by operating head-light of tractor.
•
Shaft ought to be transported in horizontal position in order not to damage covers and
other protective elements.