
2.3
•
Feed car detached from the tractor must be braked. In case the machine stands on
the slope, you must additionally secure it against rolling down by putting wedges or
other elements devoid of sharp edges, under wheels.
•
It is forbidden to carry people or animals on the machine.
•
Before setting about accoupling feed car to the farm tractor you must check technical
condition of the hook-type coupling of both the tractor and the feed car, driving shaft
and couplers of the hydraulic system and wiring system.
•
It is forbidden to accouple the feed car with tractor, in case hydraulic oils in both
machines are of different type.
•
When accoupling feed car with tractor you must use the lower or the upper hook-type
coupling of the tractor. You must check its performance and condition of safety device.
•
You must exercise special care when accoupling the machine.
•
Nobody must stay between feed car ant tractor when accoupling those machines.
•
Verify the coupling performance and verify the condition of safety device.
•
Hydraulic system works under high pressure.
•
You must verify technical condition of couplings of hydraulic as well as pneumatic
piping, on a regular basis.
•
In case of failure of hydraulic or pneumatic system, the machine must be disabled until
mending the failure.
•
When connecting hydraulic pipes to the tractor it must be observed that hydraulic
system of tractor as well as feed car were not pressurized.
•
It is necessary to check the condition of hydraulic system of the machine frequently,
no oil leaks allowed.
•
In case of hydraulic or pneumatic system failure, the feed car must be excluded from
operation until having the problem solved.
•
Before setting about repairing, one must reduce oil or air pressure in hydraulic or
pneumatic system, as appropriate.
•
In case of injury caused by intense hydraulic oil stream, it is necessary to consult the
physician. Hydraulic oil may penetrate your skin and cause infection.
Содержание VMP-10
