PRONAR T285/1, Руководство оператора

Страница: 80 / 136

Pronar T285/1 SECTION 4
4.16
DANGER
When disconnecting the load box from the trailer the drawbar shaft and tractor hitch are
subjected to great loading.
Other persons must NOT be in the immediate vicinity of the trailer and especially behind
the disconnected load box.
Do NOT travel with trailer if the hook frame and the tipping frame are not completely
folded.
Take particular care while working near electric power lines.
Do NOT operate the frame interlock while disconnecting the load box. Selection of
trailer's working mode is only possible when the tipping frame is retracted in rest
position.
4.6 LOADING THE LOAD BOX
Before beginning the load box loading make certain that the load box side walls are properly
closed and secured. The trailer must be positioned to travel forwards and be hitched to the
tractor. Loading should only take place, when trailer is placed on flat level surface and
hitched to tractor.
Distribute load evenly in the load box using suitable tools (crane, loader, conveyor, etc.),
depending on type of load. Loading should be carried out by a person experienced in this
type of work and having appropriate authorisation for operating equipment (if required). Type
of load carried depends on load box use.
Due to the various density of materials, using the total load box capacity may cause
exceeding permissible carrying capacity of hook trailer. Please note that the weight of empty
load box and its load must not exceed the permissible carrying capacity of the trailer.
Guideline specific weight of selected materials is shown in table (4.1). Take care not to
overload the trailer.