PRONAR T285/1, Руководство оператора

Страница: 75 / 136

SECTION 4 Pronar T285/1
4.11
Remove cotter pin from pin of the hitch of the first trailer. Remove drawbar pin
and drive tractor away.
DANGER
When hitching, there must be nobody between the trailers. Person assisting hitching up
machines should stand outside the area of danger and be visible to the tractor driver at all
times.
IMPORTANT!
Do NOT hitch a second trailer constructed on any chassis except dual axle.
4.4 PULLING THE LOAD BOX ON THE TRAILER
IMPORTANT!
Before connecting load box one must take off the slow-moving vehicle plate. Suspension
should be blocked using hydraulic ram cylinders. Connecting the load box should be
carried out on flat, even and level ground.
If the trailer or load box is tilted sideways or is not positioned in the trailer's axis of
symmetry while pulling in the load box, stop connecting and take the load box off the
trailer.
In order to pull the load box onto the trailer, carry out the following actions in the following
sequence.
Take off slow-moving vehicle plate from trailer.
Slide in the trailer's bumper maximally and secure it against sliding.
If necessary, adjust position of hook – see section 5.6.
Place the tractor and the trailer in front of the load box, in the straight line, at a
distance of about 1 meter from the load box hitch.