PRONAR T285/1, Руководство оператора

Страница: 37 / 136

SECTION 2 Pronar T285/1
2.11
will catch fire or be damaged, they should be removed or covered with non-
flammable material before commencing welding work. Before beginning work
prepare a CO
2
or foam extinguisher.
•
In the event of work requiring the trailer to be raised, use properly certified
hydraulic or mechanical lifts for this purpose. After lifting the machine, stable and
durable supports must also be used. Work must not be carried out under a trailer,
which has only been raised with a lift or jack.
•
The trailer must not be supported using fragile elements (bricks or concrete
blocks).
•
After completing work associated with lubrication, remove excess oil or grease.
The trailer should be kept clean and tidy.
•
The user must not repair by himself the components of the hydraulic or pneumatic
system i.e. control valves, cylinders and regulators. In the event of damage to
these elements, repair should be entrusted to authorised service point or replace
elements with new parts.
•
Do NOT install additional appliances or fittings not according to the specifications
defined by the Manufacturer.
•
The trailer may only be towed when axles and wheels, lighting system and brakes
are reliable.
2.2 DESCRIPTION OF MINIMAL RISK
Pronar Sp. z o. o. in Narew has made every effort to eliminate the risk of accidents. There is,
however, a certain minimal risk, which could lead to an accident, and this is connected mainly
with the actions described below:
•
using the hook trailer for purposes other than those for which it is intended,
•
being between the tractor and the trailer while the engine is running and when the
machine is being attached or hitched to second trailer
•
being on the machine when it operates,
•
failure to keep a safe distance from dangerous areas during loading,
disconnecting, connecting or unloading the load box,