PRONAR RC2100, Перевод оригинальной инструкции

Страница: 14 / 125

Pronar RC2100 SECTION 1
1.4
1.1.3 LIST OF FACTORY NUMBERS
TIP
If spare parts have to be ordered or if problems occur, it is very often necessary to give
the factory numbers of parts or the VIN number of the trailer. Therefore, it is
recommended that these numbers are inscribed in the table (1.2).
TAB. 1.2 List of factory numbers
VIN
S Z B R C 2 1 0 0 X
FRONT AXLE FACTORY NUMBER
REAR AXLE FACTORY NUMBER
1.2 PROPER USE
The trailer is designed for transporting agricultural and construction machines and the loads
which can be properly secured against moving during travel (loads placed in boxes,
containers, on pallets etc.). Transporting people, animals, bulk and hazardous materials is
forbidden and regarded as contrary to the intended purpose of the trailer. During the use of
the machine comply with all road traffic regulations and transport regulations in force in the
given country, and any breach of these regulations is regarded by the Manufacturer as use
contrary to its intended purpose.
The trailer is constructed according to current safety requirements and engineering
standards. The brake system and the light and indicator system meet the requirements of
road traffic regulations. The maximum speed of the trailer on public roads is 30 km/h in
Poland (pursuant to Road Traffic Act of June 20th 1997, article 20). In the countries where
the trailer is used, the limits stipulated by the road traffic legislation in force in a given country
must be observed. The trailer speed must not, however, be greater than the maximum design
speed of 40 km/h.