PRONAR RC2100, Перевод оригинальной инструкции

Страница: 47 / 125

SECTION 3 Pronar RC2100
3.5
platform. The holder is locked and secured with cotter pins. Along the whole length of the
load platform and on the ramps (on the outside), there are floor extension brackets (6)
(optional equipment) which are unfolded when transporting oversize machines. During
normal travel of the trailer, the brackets must be folded and secured with cotter pins. On the
right side of the frame, in front of the front wheel, there is a toolbox (optional equipment) and
parking brake mechanism.
3.2.2 DRAWBAR OF TRAILER
FIG. 3.3 Drawbar
(1) rotary drawbar, (2) drawbar faceplate, (3) drawbar hitching eye, (4) parking stand,
(5) spring, (6) line bracket
In the front part of the trailer, Figure (3.3), there is a rotary drawbar (1) with shock absorbing
springs (5). Drawbar hitching eye (3) is bolted to the drawbar faceplate (2). Depending on
configuration, fixed drawbar with a
∅
50 mm eye, fixed drawbar with a
∅
40 mm eye, rotating
drawbar with a
∅
50 mm eye and ball drawbar with diameter of
∅
80 mm (standard