PRONAR PRONAR 5110, Руководство оператора

Страница: 55 / 122

Section 5: USING THE TRACTOR
5-7
STOPPING ENGINE AND TRACTOR
Stopping tractor requires:
•
reduction of engine RPM speed;
•
pressing on clutch pedal until resistance is felt;
•
setting gear lever in neutral setting (N);
•
pressing working brake (primary);
•
after stopping tractor, engaging parking brake hand lever (Figure 5-2).
ATTENTION: In the event of emergency braking, simultaneously press brake and
clutch pedals.
Do not stop engine at high temperatures of lubricating oil and coolant liquid. It is recommended to
leave engine running at lower revolution speeds until oil and coolant temperature drops. Stopping engine
requires setting the accelerator lever 2 (Figure 4-16) in "minimum" position
”
, and turning the ignition key to
position 0 (Figure 4-15) and in the event of finishing work, disconnecting battery with switch inside cab
(Figure 5-2). Indicator lamps on control panel should be extinguished.
ATTENTION: Turbocharged engines (PRONAR-5130 / 5135 / 5235) must be allowed to
cool down after work, if they operated under load.
Before stopping the engine, first reduce engine revolution speed to 800-1000 rpm and
allow to run idle without load for around 5 minutes.